Product Category
-
Old NANQI 25K-5 Headlight Assembly
-
ZOOMLION Genuine DX-25B Cable Reel
-
Electronic Accelerator Pedal Assembly Product Description
-
ZOOMLION Crane Dedicated Industrial Monitor
-
Zoomlion Crane Load Moment Limiter Display Terminal
-
XCMG Crane Old Model 25K Universal Tri-Color Rear Tail Light Assembly
-
SANY GJ-1 Limit Switch (Fits All SANY Hoisting Equipment Series)
-
HIRSCHMANN WG143 Angle Sensor
-
SANY Genuine Pressure Sensor (MBS Series)
-
JC6000 Series Industrial Joystick Controller
-
Sany 25 Ton Crane Reel Box Control Board (Boom Cable Box ECU)
-
YL06ECB-11 Electronic Accelerator Pedal Assembly
-
XCMG Crane IC4600 System Mainboard & Driver Board
-
cSCALE S9 Compact Safety Controller
-
Crane Safety Upgrade Solution: Intelligent Moment Limiter Retrofit Kit
-
533 40-A35B0W0-0 Angular Encoder
XCT25KC Rear Tail Light Assembly
Designed specifically for the XCT25KC crane and other heavy-duty engineering vehicles, this rear tail light integrates multiple functions including running, turn signal, brake, and reverse lighting. It is a factory-matched accessory with high compatibility.
Description
Tags
Designed specifically for the XCT25KC crane and other heavy-duty engineering vehicles, this rear tail light integrates multiple functions including running, turn signal, brake, and reverse lighting. It is a factory-matched accessory with high compatibility.
Product Features
Factory-Matched Design: Strictly adheres to the installation and electrical specifications of the XCT25KC model, allowing for direct replacement without additional modifications.
High Durability: The housing is made of thickened PC material, providing waterproof, dustproof, and impact-resistant performance to withstand harsh construction site environments.
High-Visibility Warning: Built-in high-brightness LED beads ensure effective rear visibility even in rain, fog, or low-light conditions.
Model & Specification Table
| Item | Details |
| Compatible Vehicle | XCT25KC Crane |
| Product Model | XCT25KC-HWT-001 |
| Operating Voltage | DC 24V (Standard for Engineering Vehicles) |
| Waterproof Rating | IP67 |
| Installation Method | Factory Buckle + Screw Fixation |
| Harness Connector | Factory Plug-and-Play |
| Service Life | ≥30,000 Hours |
Installation & Usage Instructions
Ensure the vehicle is turned off and disconnected from power before installation to avoid short circuits.
When removing the old tail light, first disconnect the harness plug, then unscrew the mounting screws.
Align the new tail light with the mounting position, insert the factory plug, and ensure a secure connection.
Secure the tail light with the included screws, start the vehicle, and test all lighting functions to confirm proper operation.
For daily maintenance, periodically wipe the lens with a dry cloth to maintain light transmittance.
CONTACT US
Related Products
Zoomlion Original Power Control Board – Specialized Power Distribution Module for Construction Machinery
🔹 Core Functions Multi-circuit Power Distribution: Supports independent power supply for multiple...
XCMG Crane IC4600 System Mainboard & Driver Board
This is a high-cost-performance replacement for the original Hirschmann IC4600 computer, designed exclusively for XCMG cranes. Our mainboard has undergone 12 months of outdoor working condition testing, achieving 100% compatibility. It can directly replace faulty mainboards to quickly restore parameter display and motion control functions of the crane’s upper computer, significantly reducing maintenance costs and downtime.
Industrial Proportional Control Joystick
Designed specifically for construction machinery, lifting equipment, aerial work platforms, and other demanding scenarios, this joystick combines ergonomic design with precision sensing technology to deliver accurate proportional control of hydraulic valves or actuators. It features high protection ratings and durability, making it ideal for harsh outdoor working environments.
Wika X602M Load Moment Indicator (LMI)
The X602M is an industrial-grade safety monitoring terminal specifically engineered for construction machinery, widely applied in truck cranes, lorry-mounted cranes, crawler cranes and other hoisting equipment. It collects and processes key data such as lifting load, boom length and angle in real-time, dynamically calculates the load moment, and triggers audio-visual alarms when approaching or exceeding safety thresholds.
Sany Original 10.4-inch Special Display for Construction Machinery
This industrial-grade human-machine interface terminal is custom-engineered for Sany excavators, cranes and other heavy construction equipment. Fully compatible with the original factory CAN bus protocol, it enables direct replacement of the stock screen with zero extra debugging, ensuring seamless integration with your Sany machinery.
Xuzhou Hirschmann IC3601 Crane Dedicated Display
Real-time Condition Monitoring: Dynamically displays moment percentage, actual load, rated load, boom length, and elevation angle, keeping operators fully informed of equipment status. Multi-level Safety Warning: The 3-color warning bar (green/yellow/red) on the right side of the screen changes synchronously when approaching safety limits, paired with a buzzer alert to proactively avoid hazards. Original Factory Protocol Compatibility: Perfectly matches the original control protocol of the Zoomlion QY30V, enabling direct replacement without additional debugging for stable data transmission.
Electronic Throttle Pedal for Construction Machinery
This electronic throttle pedal is engineered for construction machinery, heavy-duty trucks, forklifts, and agricultural equipment. It features a suspended mounting design and a built-in high-precision Hall sensor.
Zoomlion ZLDQ-8BA-6Q Construction Machinery LCD Display
Industrial-Grade Protection: IP65 dust and water resistance, wide temperature operating range, unaffected by construction site dust, rain, and extreme temperatures. High-Definition Visibility: High-brightness LCD screen with clear readability in direct sunlight, supporting automatic/manual brightness adjustment. Multi-Function Integration: Simultaneously supports CAN bus data display and multi-channel video input, compatible with reverse camera and equipment monitoring feeds.
WIKA iFLEX E5/0101 Crane Dedicated Controller
The WIKA iFLEX E5/0101 is a core control unit specifically engineered for construction machinery, particularly for various types of cranes. It can collect and process signals from load moment limiters, angle sensors, length sensors, and more in real time, then output precise control commands, making it a critical component for ensuring the safe and efficient operation of lifting equipment.
XCMG Crane Dedicated Boom Junction Box CAN Board
Key Product Features Plug-and-Play Factory Fit The connectors and pinouts are 100% compatible wit...
XCMG Old Model Crane Original Lower Cab Control Mainboard (ER81-60-12)
Core Selling Points Original Equipment Fit: Factory-matched board for XCMG QY Series cranes produ...
ifm CR9042 Industrial Display Terminal
A rugged human-machine interface (HMI) designed specifically for construction machinery and heavy-duty vehicles, offering reliable performance and clear data visualization even in harsh job site conditions. It is a direct replacement for Zoomlion concrete pump trucks, mobile cranes, and other equipment.
533 40-A35B0W0-0 Angular Encoder
Engineered by NOBEL ELEKTRONIK GmbH, the 533 40-A35B0W0-0 angular encoder delivers high-precision angular position feedback for demanding industrial environments. Its rugged construction and reliable performance make it ideal for applications where accurate rotational sensing is critical, even under harsh conditions.
XCMG Crane Tail Light Lens
This tail light lens can withstand long-term outdoor exposure, rain, and extreme cold. The red-amber-white color zoning preciselyenhancing safety during operation and travel.
WIKA MH-4 Pressure Transducer
The WIKA MH-4 pressure transducer is engineered for the harsh operating conditions of construction machinery and mobile hydraulic equipment. Featuring an all-metal welded construction and integrated shock-resistant design, it delivers precise pressure signals reliably even under vibration, shock, and temperature fluctuations. It is the ideal pressure monitoring solution for hydraulic systems, braking systems, and heavy-duty equipment.
XCMG Crane HC4900 Load Moment Limiter Main Board
Core Advantages Industrial-Grade Anti-Interference Design：On-board EMI filter circuit adapts to ...
