Pontšo ea crane LMI e ka bonts'a data e fosahetseng ka lebaka la liphoso tsa lets'oao la sensor, ho hloleha ha puisano, lithapo tse senyehileng, liparamente tse sa nepahalang tsa calibration, mathata a taolo, kapa ponts'o e sa lumellaneng. Ha basebelisi ba bona litekanyetso tse sa nepahalang tsa mojaro, bolelele ba boom bo fosahetseng, lipalo tse sa nepahalang, kapa melaetsa ea temoso e sa tsitsang, bothata ha se kamehla e leng pontšo ka boeona. Pontšo ea LMI e amohela le ho sebetsana le tlhahisoleseling ho tsoa ho likarolo tse ngata, ho kenyeletsoa li-sensor tsa khatello, li-angle sensors, li-boom length sensors, li-cable reel le li-controller. Tlhahlobo e nepahetseng e hloka ho hlahloba ketane e feletseng ea matšoao ho e-na le ho fetola likarolo ka mokhoa o sa reroang. Tataiso ena e hlalosa hore na hobaneng liponts'o tsa crane LMI li bonts'a tlhahisoleseling e fosahetseng, mokhoa oa ho tseba karolo e fosahetseng, le hore na bareki ba lokela ho fana ka lintlha life ha ba odara likarolo tsa ponts'o tsa LMI.

---

Pontšo ea Crane LMI e bontša lintlha life?

Pontšo ea "crane Load Moment Indicator" ke sebopeho sa opareitara bakeng sa ho beha leihlo maemo a ts'ebetso a crane.

Ho ipapisitsoe le mofuta oa crane le tlhophiso ea sistimi, ponts'o e ka bonts'a:

• Moroalo oa 'nete oa ho phahamisa
• E lekantsoeng ka matla a ho phahamisa
• Laola peresente
• Boom angle
• Boom bolelele
• Radius e sebetsang
• Phetoho ea Crane
• Boemo ba alamo
• Lintlha tsa moeli oa polokeho

Pontšo ka boeona ha e lekanye liparamente tsena kaofela ka boikemelo.

Ho e-na le hoo, e fumana melaetsa e tsoang ho:

• Sensor khatello ea mojaro
• Boom angle sensor
• Sensor ea bolelele ba boom
• Sistimi ea li-cable reel
• Molaoli oa LMI
• Khokahano ea likhokahano ea KA

Ka hona, tlhahisoleseling e fosahetseng skrineng e ka tsoa ho karolo efe kapa efe ea ketane ea matšoao.

Lisebelisoa tsa XZJMD Lisebelisoa tsa Crane Monitor / LMI Display bakeng sa mefuta le lits'ebetso tse fapaneng tsa crane, ho kenyeletsoa tharollo ea XCMG, SANY, Zoomlion le lisebelisoa tse ling tsa crane.

---

Bothata ba 1: Pontšo ea Crane LMI e Bontša Boima ba Boima bo Fosahetseng

E 'ngoe ea litletlebo tse atileng haholo ke:

Pontšo ea crane e bonts'a boima bo fosahetseng ba ho phahamisa.

Matšoao a tloaelehileng:

• Theko ea mojaro e phahame ho feta boima ba 'mele
• Boleng ba thepa bo fetoha ka tšohanyetso
• Tlhokomeliso ea boima bo bongata e hlaha nakong ea ho phahamisa ka mokhoa o tloaelehileng
• Boleng ba ponahatso ha bo tsamaellane le chate ea thepa

Lisosa tse ka bang teng:

Phoso ea Sensor ea Khatello

Sistimi ea LMI e lekanya mojaro o ipapisitse le khatello ea hydraulic.

Haeba sensor ea khatello e fana ka data e fosahetseng, ponts'o e ka bonts'a:

• Peresente ea mojaro e fosahetseng
• Tlhokomeliso e feteletseng ea bohata
• Ho bala boima bo sa tsitsang

Bothata ba Sensor Calibration

Ka mor'a ho fetola:

• Sensor ea khatello
• Molaoli
• Pontšo

sistimi e ka hloka ho nchafatsoa.

Karolo e ncha e se nang liparamente tse nepahetseng e ka hlahisa tlhahisoleseling e fosahetseng.

XZJMD e fana ka Litharollo tsa Sensor Crane ho kenyelletsa li-sensor tsa khatello le likarolo tsa ho beha leihlo tse sebelisoang litsing tsa crane LMI.

---

Bothata ba 2: Boom Length kapa Angle Data e Fosahetse

Sistimi ea LMI e itšetlehile haholo ka tlhaiso-leseling ea boemo ba boom.

Haeba setšoantšo se bontša:

• Bolelele bo fosahetseng ba boom
• Tsela e fosahetseng ea boom
• Radise e sebetsang e fosahetseng

lisosa tse ka bang teng li kenyelletsa:

• Ho hloleha ha sensor ea angle
• Tšenyo ea li-cable reel
• Khatiso ea lets'oao la sensor ea bolelele
• Mathata a lithapo
• Liphoso tsa puisano

Ho hloleha ha Sensor ea Boom Angle

Sensor ea angle e fana ka tlhahisoleseling mabapi le:

• Phahamiso ea Boom
• Palo ea radius e sebetsang
• Palo ea moeli oa polokeho

Matšoao a tloaelehileng:

• Ponahatso e fapaneng e fapane le boemo ba boom ba nnete
• Alamo e hlaha nakong ea ts'ebetso e tloaelehileng
• Palo ea bokhoni e fetoha e sa nepahalang

Boom Length Sensor / Cable Reel Failure

Reel ea cable e lekanya bolelele ba boom katoloso.

Ho hloleha ho ka kenyelletsa:

• Ho robeha ha thapo
• Tšenyo ea nakong ea selemo
• E hlolehile ho khouto
• Tšitiso ea lets'oao

XZJMD e fana ka Likarolo tsa Lebokose la Crane Cable Reel bakeng sa lisebelisoa tsa tekanyo ea bolelele ba boom.

Lisebelisoa tse tloaelehileng li kenyelletsa:

• XCMG crane cable reel
• SANY crane cable reel
• Zoomlion crane cable reel
• Sistimi ea li-cable reel e lumellanang le Hirschmann

---

Bothata ba 3: Pontšo ea Crane LMI e na le Liphoso tsa Puisano

Ka linako tse ling li-sensor kaofela li sebetsa ka mokhoa o tloaelehileng, empa skrineng ha e khone ho fumana lintlha tse nepahetseng.

Matšoao a tloaelehileng:

• Libaka tsa data tse se nang letho
• Skrine se hatselitsoeng
• Qala hape ka tšohanyetso
• Molaetsa oa phoso oa puisano
• Lintlha tse sieo tsa sensor

Lisosa tse ka bang teng:

E KA Hlōleha Puisano

Sistimi ea sejoale-joale ea elektroniki ea crane hangata e sebelisa puisano ea CAN lipakeng tsa:

• Pontšo
• Molaoli
• Li-sensor

Mathata a puisano a ka bakoa ke:

• Lithapo tse senyehileng
• Lihokelo tse hlephileng
• Ho kena metsing
• Khokahano e mpe ea motlakase
• Ho hloleha ho laola

Mathata a Wiring Harness

Harness e senyehileng e ka sitisa:

• Phepelo ea matla
• Lipontšo tsa kutlo
• Lipontšo tsa puisano

Pele o fetola pontšo, litsebi li lokela ho hlahloba:

• Boemo ba sehokelo
• Phepelo ea motlakase
• Khokahano ea fatše
• Mehala ea puisano

---

Bothata ba 4: Pontšo ea Crane ea Replacement LMI ha e Tšoanang le Crane

Ho fetola ponts'o ea LMI ha se kamehla e leng mokhoa o bonolo oa plug-and-play.

Pontšo e lumellanang e tlameha ho tšoana:

• Moetsi oa crane
• Mohlala oa crane
• Phetolelo ea sistimi ea LMI
• Lisebelisoa tsa software
• Protocol ea puisano
• Tlhophiso ea sehokelo

Ka mohlala:

Pontšo e tsoang ho mofuta o le mong oa crane ea XCMG e kanna ea se sebetse hantle moetsong o mong haeba:

• Liparamente tsa chate ea mojaro lia fapana
• Mofuta oa software oa fapana
• Protocol ea puisano e fapane

Pele o reka e 'ngoe, bareki ba lokela ho fana ka:

• Mofuta oa ponts'o ea mantlha
• Nomoro ea karolo
• Mohlala oa crane
• Linepe tsa lihokelo
• Lintlha tse teng tsa software

XZJMD e ts'ehetsa litharollo tse ncha tsa mefuta e fapaneng ea crane ho kenyelletsa XCMG, SANY le Zoomlion.

---

Bothata ba 5: Pontšo e ea sebetsa empa e bonts'a Liparamente tse Fosahetseng tsa Crane

Taba e 'ngoe e tloaelehileng e etsahala ka mor'a:

• Hlahisa e ncha
• Ho nkela sebaka sa taolo
• Ntlafatso ea sistimi
• Phetoho ea crane

Skrine e ka bulela ka mokhoa o tloaelehileng empa e bonts'a:

• Bokhoni bo fosahetseng ba ho phahamisa
• Mohlala o fosahetseng oa crane
• Chate ea mojaro e fosahetseng
• Mokhoa o fosahetseng oa ho sebetsa

Mabaka a ka bang teng:

• Faele ea parameter e fosahetseng
• Lintlha tsa tlhophiso ha li eo
• Tekanyetso e fosahetseng
• Phapang ea software

Pontšo ea LMI ke karolo e le 'ngoe feela ea sistimi e felletseng ea polokeho.

Molaoli le pontšo li tlameha ho arolelana tse nepahetseng:

• Phetoho ea Crane
• Laela chate
• Litekanyetso tsa sensor calibration
• Mekhahlelo ea ts'ebetso

---

Bothata ba 6: Ho Senyeha ha Skrine le ho Hlōleha ha Hardware

Ha se mathata ohle a ponts'o a amanang le software.

Ho hloleha 'meleng ho kenyelletsa:

• Skrine e ntšo
• Likonopo tse robehileng
• LCD e senyehileng
• Tšenyo ea metsi
• Ho hloleha ha matla
• Ho hloleha ha tshebetso ya ho ama
• Tšenyo ea karolo ea elektronike ka hare

Lisosa tse tloaelehileng:

• Ho pepesehela kantle nako e telele
• Ho thothomela
• Mocheso oa fetoha
• Mongobo
• Ho se tsitse ha motlakase

Bakeng sa li-cranes tsa khale, ho fetola pontšo ho ka ba le chelete e ngata ho feta ho lokisa lisebelisoa tsa elektroniki tse seng li sa sebetse.

XZJMD e fana ka Crane Monitor Replacement Parts bakeng sa lisebelisoa tsa tokiso le tse ncha.

---

Mokhoa oa ho tseba bothata ba ho hlahisa Crane LMI?

Latela mokhoa ona oa ho rarolla mathata:

Mohato oa 1: Ngola Phoso

Bokella:

• Khoutu ea alamo
• Hlahisa molaetsa
• Boemo ba ts'ebetso ea Crane
• Phoso khafetsa

---

Mohato oa 2: Bapisa Boitsebiso ba Pontšo le Maemo a Sebele

Sheba:

• Haele hantle
• Bolelele ba boom ba 'nete
• Mojaro oa 'nete
• Bontša ho bala

Hlalosa hore na ke paramethara efe e fosahetseng.

---

Mohato oa 3: Hlahloba Phepelo ea Matla

Netefatsa:

• Matla a motlakase
• Khokahano ea fatše
• Boemo ba sehokelo

---

Mohato oa 4: Li-sensors tsa liteko

Sheba:

• Sensor ea khatello
• Sensor ea angle
• Sensor ea bolelele

---

Mohato oa 5: Hlahloba Puisano

Hlahloba:

• E KA hokahanngoa
• Khoele ea likhoele
• Puisano ea molaoli

---

Mohato oa 6: Netefatsa data ea Calibration

Ka mor'a ho fetola likarolo:

• Pontšo
• Sensoro
• Molaoli

etsa calibration e hlokahalang le ho seta parameter.

---

XZJMD e fana ka likarolo life tsa Crane LMI Display?

Crane LMI Pontšo / Monitor

E sebelisetsoa:

• Tlhokomelo ea mojaro
• Pontšo ea alamo
• Ponahalo ea paramente ea crane

Sehokelo sa sehlahisoa:

https://www.xzjmd.com/products/monitor/

---

Likarolo tsa Sensor ea Crane

Ho kenyeletsoa:

• Sensor ea angle
• Sensor ea khatello
• Sensor ea bolelele

Sehokelo sa sehlahisoa:

https://www.xzjmd.com/products/sensor/

---

Crane Cable Reel Lebokose

E sebelisetsoa:

• Tekanyo ea bolelele ba boom
• Phetiso ea matšoao

Sehokelo sa sehlahisoa:

https://www.xzjmd.com/products/cable-reel-box/

---

Crane Controller le Mainboard

E sebelisetsoa:

• Ts'ebetso ea data
• Palo ea LMI
• Phetoho ea elektronike

Sehokelo sa sehlahisoa:

https://www.xzjmd.com/products/motherboard/

---

Ke Tlhahisoleseding efe eo Bareki ba Lokelang ho e Fana ha ba Odara Pontšo ea Crane LMI?

Ho qoba ho bapisa ho fosahetseng, bareki ba lokela ho fana ka:

Ho fana ka lintlha tse felletseng ho thusa barekisi ho fumana tharollo e nepahetseng kapele.

---

Na Crane ea Khale e ka Sebelisa Pontšo e Ncha ea LMI?

E, empa ho lumellana ho tlameha ho netefatsoa.

Bakeng sa li-cranes tsa khale, tharollo e ka hloka:

• Pontšo e ncha
• Ho nkela sebaka sa taolo
• Tšebelisano ea kutlo
• Phetoho ea parameter
• Tekanyetso

Ntlafatso e felletseng e ka sebetsa haholoanyane ha:

• Likarolo tsa mantlha li khaotsoe
• Litšenyehelo tsa ho lokisa li holimo
• Theknoloji ea pontšo e siiloe ke nako
• Ho thata ho fumana likarolo tse ling

XZJMD e fana ka phetisetso ea elektroniki ea crane le tharollo ea ntlafatso bakeng sa mefuta e fapaneng ea crane.

---

Lipotso Tse Botsoang Hangata

Hobaneng ha ponts'o ea LMI ea crane ea ka e bonts'a mojaro o fosahetseng?

Lisosa tse ka bang teng li kenyelletsa:

• Mathata a sensor ea khatello
• Liphoso tsa ho lekanya
• Litaba tsa puisano tsa balaoli

---

Hobaneng ha ponts'o ea ka ea crane e bonts'a bolelele bo fosahetseng ba boom?

Lisosa tse ka bang teng:

• Ho hloleha ha thapo ea thapo
• Tšenyo ea sensor ea bolelele
• Mathata a lithapo

---

Na ho nkela ponts'o ea LMI sebaka ho hloka ho lekanyetsoa?

Maemong a mangata, ho joalo. Pontšo e ncha e tlameha ho lumellana le liparamente tsa crane le tlhophiso ea sistimi.

---

Na sensor e mpe e ka ama ponts'o ea LMI?

Ee. Matshwao a sensor a fosahetseng a ama ka kotloloho data e bontshitsweng.

---

Nka fumana sebaka se nepahetseng sa ponts'o ea crane LMI joang?

Fana ka:

• Mofuta oa Crane
• Mohlala oa crane
• Nomoro ea karolo ea mantlha
• Linepe tsa lihlahisoa
• Lintlha tsa phoso

---

Na U hloka Phetoho e Tšoanang ea Crane LMI Display?

Lintlha tse fosahetseng tsa LMI tse bonts'ang li ka ama ts'ebetso ea crane le polokeho.

Pele o fetola likarolo, hlahloba:

• Boemo ba pontšo
• Lipontšo tsa kutlo
• Maikutlo a li-cable reel
• Puisano ea molaoli
• Li-parameter tsa calibration

Lisebelisoa tsa XZJMD:

• Lipontšo tsa Crane LMI
• Li-sensor
• Mabokose a Reel a Cable
• Balaoli
• Likarolo tsa Phetoho ea Elektronike

Fana ka mohlala oa hau oa crane, nomoro ea karolo ea mantlha le tlhaloso ea phoso.

Ikopanye le XZJMD bakeng sa tharollo e lumellanang ea Crane LMI Display le tšehetso ea tekheniki.