Product Category
-
Penny & Giles JC6000 Industrial Joystick Handle
-
cSCALE S9 Compact Safety Controller
-
PEC-WY-03TA-200 Crane Load Moment Indicator Display
-
WIKA cSCALE On-Board Safety Controller
-
A2Y07HPFU0 (0068-1) Temperature Sensor
-
4V220-08 Double Solenoid 5/2 Way Solenoid Valve
-
XCMG Crane CAN Communication Length & Angle Conversion Board
-
Wika X602M Load Moment Indicator (LMI)
-
Kunlun Tongtai mcgsTpc Industrial HMI Touch Screen
-
Zoomlion 25K/FKD/XCT/8-Ton Universal Truck Tail Light
-
GJ-3 Overwind Limit Switch
-
PAT LWC 321 Series Crane Cable Reel Assembly
-
SANY SY-PD084 Vehicle-Mounted Industrial Display
-
3B6 Crane Moment Indicator (Load Moment Limiter)
-
Raico Wireless Anti-Overwind Limit Switch
-
Hirschmann HC-3002 Crane Load Moment Indicator Monitor
SENTOP BN60FCA Electronic Accelerator Pedal
The SENTOP BN60FCA Electronic Accelerator Pedal is engineered for forklifts, loaders, excavators, and other construction machinery, as well as electric vehicles. It uses non-contact Hall sensor technology to convert pedal movement into precise electrical signals, allowing for accurate control of engine speed or motor power.
Featuring dual redundant signal output and IP67 protection, this pedal delivers reliable performance in harsh working conditions and is a core control component for industrial vehicles.
Description
Tags
Product Overview
The SENTOP BN60FCA Electronic Accelerator Pedal is engineered for forklifts, loaders, excavators, and other construction machinery, as well as electric vehicles. It uses non-contact Hall sensor technology to convert pedal movement into precise electrical signals, allowing for accurate control of engine speed or motor power.
Featuring dual redundant signal output and IP67 protection, this pedal delivers reliable performance in harsh working conditions and is a core control component for industrial vehicles.
Core Specifications
| Item | Specification |
| Model | BN60FCA-S-R1-C(104) |
| Sensor Type | Hall effect sensor (conductive plastic potentiometer optional) |
| Output Signal | Dual 0–5V analog signals (redundant design) |
| Operating Voltage | DC 5V ±0.25V |
| Operating Current | ≤50mA |
| Protection Class | IP67 |
| Operating Temperature | -40°C ~ +85°C |
| Mechanical Life | ≥5,000,000 cycles |
| Mounting Type | Floor-mounted |
| Harness Length | Standard 1.2m (customizable) |
| Connector Type | Waterproof industrial connector |
Key Advantages
High Reliability
Non-contact Hall sensors eliminate mechanical wear, while dual redundant signals significantly reduce failure risks.
Environmental Resilience
Standardized mounting holes fit most industrial vehicle chassis, and corrugated tube harnessing provides excellent drag resistance.
Safety & Compliance
CE-certified to meet industrial vehicle electrical safety standards, protecting both equipment and operators.
Applications
Construction machinery (forklifts, loaders, excavators)
Special-purpose electric vehicles (sightseeing carts, sanitation trucks)
Agricultural machinery and port equipment
CONTACT US
Related Products
Hirschmann DAVC 300/2401 Hydraulic Transducer
As a core model in the pressure transmitter series of Germany's Hirschmann, the 2401/400 sensor, ...
Steering Angle Sensor 530 760-A00AX20-1
High-Precision Angle Measurement Solution for Construction Machinery, Special Vehicles, and Industrial Steering Systems
SANY GJ-1 Limit Switch (Fits All SANY Hoisting Equipment Series)
The SANY GJ-1 Overwind Switch is a safety protection device specifically designed for hoisting machinery. By real-time monitoring the hook position, it quickly cuts off the lifting control circuit when the preset limit height is reached, fundamentally preventing accidents such as steel wire rope overwinding, breakage and hook overtopping. It provides reliable protection for equipment and personnel safety. This product is compatible with all series of SANY cranes, crawler cranes, truck cranes and port hoisting equipment, featuring high protection level and strong anti-interference capability to adapt to various complex working conditions.
XCMG Sensor LPS60-049P6009
The LPS60-049P6009 is an industrial-grade dual-channel pressure sensor engineered for hydraulic systems. It adopts high-precision diffused silicon sensing elements, delivering dual independent standard electrical signals to accurately monitor pressure fluctuations in construction machinery hydraulic circuits, providing real-time and stable pressure data for the control system. Specifically designed for XCMG aerial work platforms and other heavy-duty equipment, it features excellent vibration resistance, impact resistance, and corrosion resistance, enabling long-term reliable operation even under harsh working conditions.
Electronic Throttle Pedal for Construction Machinery
This electronic throttle pedal is engineered for construction machinery, heavy-duty trucks, forklifts, and agricultural equipment. It features a suspended mounting design and a built-in high-precision Hall sensor.
Electronic Accelerator Pedal Assembly Product Description
This electronic accelerator pedal assembly features an all-electronic signal transmission design, eliminating the need for traditional mechanical cable systems. It accurately captures pedal travel angle and outputs a linear voltage signal, delivering smoother power response and more precise control for your vehicle.
Zoomlion MCS-300 Load Moment Limiter (Original Equipment)
Original Equipment Compatibility Factory-matched for Zoomlion models like QY25V531 (Product Code: 1021500495). Direct replacement with no additional debugging required. High-Precision Monitoring Multi-channel sensor interface supports angle, weight, length, and other signal inputs, delivering industry-leading data accuracy. Audible & Visual Alarm Built-in buzzer and high-brightness indicator light provide simultaneous warnings when approaching or exceeding safe limits, ensuring operators respond immediately. Full-metal enclosure and aviation connectors provide IP65 dust and water resistance,
SANY Original Boom Length Measuring Cable Reel DX-13 for Crane
This is an original factory cable reel (also known as a boom length measuring sensor) exclusively designed for SANY cranes. As a core component of the crane safety monitoring system, it accurately collects real-time data on boom extension and retraction, providing precise safety assurance for lifting operations.
TM 63201 24V Solenoid Valve Product Description
The TM 63201 is a pilot-operated proportional solenoid valve engineered for heavy-duty hydraulic systems. It delivers fast response and stable pressure control, making it ideal for demanding applications such as construction machinery and commercial vehicle hydraulic systems. This valve precisely regulates oil pressure and flow to ensure efficient equipment operation.
Orange Magnetic Rotating Beacon Light
This orange magnetic rotating beacon light is engineered for construction vehicles, roadside rescue, and temporary work zones. It features a highly transparent orange housing paired with a rotating light source, delivering long-distance visibility and high recognition. The built-in strong magnetic base enables instant attachment to metal surfaces without additional tools, while the coiled power cord connects directly to your vehicle’s power supply. It is a reliable safety solution for all outdoor work scenarios.
SANY Genuine Pressure Sensor (MBS Series)
A genuine pressure sensor designed exclusively for SANY construction machinery hydraulic systems. It accurately monitors pressure in hydraulic pumps, boom and arm cylinders, providing real-time data to the control system to ensure precise equipment operation and overload protection.
LC2-10-C-2H Solenoid Valve Coil
This is an industrial-grade solenoid valve drive coil designed to work with a wide range of hydraulic and pneumatic solenoid valve bodies. It delivers stable electromagnetic conversion performance and reliable structural design, making it ideal for use in various automated fluid control systems.
Hirschmann LMI Load Moment Indicator
Engineered for the safety of construction machinery lifting operations, the Hirschmann LMI Load Moment Indicator serves as the core safety component for mobile cranes, all-terrain cranes, and similar equipment.
Zoomlion ZTC120V Load Moment Limiter Display
The Zoomlion ZTC120V Load Moment Limiter Display is the factory-original safety brain for your ZTC120V truck crane. Designed to prevent tipping, structural damage, and catastrophic failure, this terminal processes real-time data from angle, length, and load sensors to calculate lifting moment dynamically. It delivers instant visual and audible alerts when approaching safe limits, and triggers automatic overload protection to shut down unsafe operations—keeping your team and equipment secure.
Product Description: EPEC 2038-20 Controller
The EPEC 2038-20 Controller is a compact, rugged control unit engineered for construction machinery, special-purpose vehicles, and mobile equipment.
Hirschmann HC3902 Crane Display Terminal
A professional display unit engineered for the harsh conditions of construction machinery, serving as the core interface for load moment indicator (LMI) systems on mobile cranes, crawler cranes, and other lifting equipment. It delivers real-time safety monitoring to ensure secure lifting operations.
