Product Category
-
SANY SY-PD084 Vehicle-Mounted Industrial Display
-
XCT 5T/8T Universal Tail Light
-
Heavy Machinery Pilot Control Handle
-
ZF 6041.327.033 Transmission Control Unit
-
Crane Safety Upgrade Solution: Intelligent Moment Limiter Retrofit Kit
-
533450-A25H3X0-3 Angle sensor
-
ZF Intarder Control Unit (0 260 001 028 / ZF 6009 373 001)
-
4V220-08 Double Solenoid 5/2 Way Solenoid Valve
-
Xuzhou Hirschmann IC3601 Crane Dedicated Display
-
ZOOMLION Genuine DX-25B Cable Reel
-
XCMG HC3900 Crane Upper Computer Mainboard
-
Electronic Accelerator Pedal for Electric Vehicles
-
XCMG Sensor LPS60-049P6009
-
SANY Crane Height Limiter (ZN101W)
-
Old NANQI 25K-5 Headlight Assembly
-
Sany Heavy Industry Crane-Specific ePro 8.4-inch Display
Penny & Giles JC6000 Series Industrial Joystick
Engineered for heavy-duty equipment in ports, construction machinery, and specialized vehicles, this joystick features Hall-effect sensing technology to deliver precise, reliable control even in the harshest operating conditions.
Description
Tags
Engineered for heavy-duty equipment in ports, construction machinery, and specialized vehicles, this joystick features Hall-effect sensing technology to deliver precise, reliable control even in the harshest operating conditions.
Core Models & Specifications
| Model Number | Axis Count | Top Button Configuration | Output Signal | Protection Rating | Mechanical Life | Typical Applications |
| JC6000-XY-A06D-100 | 2-axis (X/Y) | 6 buttons (2 yellow + 2 red + 2 green) | 0-5V / 4-20mA | IP65 | ≥10 million cycles | Container reach stackers, heavy-duty forklifts |
| JC6000-XY-A01D-100 | 2-axis (X/Y) | 1 button (red emergency stop) | 0-5V / 4-20mA | IP65 | ≥10 million cycles | Stackers, port cranes |
| JC6000-Z-A04D-100 | 1-axis (Z) | 4 buttons (customizable) | 0-5V / 4-20mA | IP65 | ≥8 million cycles | Aerial work platforms, special-purpose vehicles |
Key Features
Hall-Effect Sensing Technology
Uses non-contact Hall sensors to eliminate mechanical wear, delivering highly linear output signals for consistent, long-lasting control.
IP65 Rated Protection
Sealed against dust, water, and oil, making it ideal for demanding environments like ports and construction sites.
Modular Design
Buttons, axis count, and output types are fully customizable. The joystick supports quick disassembly and maintenance, minimizing equipment downtime.
Rugged Durability
Tested to withstand over 10 million mechanical cycles, ensuring reliable performance for high-frequency operations in heavy machinery.
Installation & Compatibility
Features standard aviation plug connectors at the base, compatible with most mainstream construction machinery control systems, enabling direct replacement of original equipment manufacturer (OEM) parts.
Offers ±15° operating angle with a spring-loaded self-centering mechanism, providing comfortable handling and precise positioning.
CONTACT US
Related Products
ICA3601-043H Industrial Display for Construction Machinery
The ICA3601-043H is an industrial-grade intelligent display engineered for construction machinery and mobile equipment. Featuring a 4.3-inch high-brightness color LCD screen housed in a rugged die-cast aluminum enclosure, it delivers reliable performance in harsh operating conditions including vibration, extreme temperatures, and high humidity. It provides real-time status monitoring, fault diagnostics, and human-machine interaction for aerial work platforms, forklifts, sanitation vehicles, excavators, and more.
WIKA WGC 090-1401/WG211-090
The WGC 090-1401 is a high-precision angle sensor engineered by Germany’s WIKA specifically for the construction machinery sector. As a core component of the load moment limiter system in heavy-duty mobile cranes and crawler cranes, it provides real-time, accurate monitoring of the boom’s elevation angle. This critical data ensures the safety of lifting operations, and the sensor is widely compatible with leading Chinese construction machinery brands such as XCMG, SANY, and Zoomlion.
SANY GJ-1 Limit Switch (Fits All SANY Hoisting Equipment Series)
The SANY GJ-1 Overwind Switch is a safety protection device specifically designed for hoisting machinery. By real-time monitoring the hook position, it quickly cuts off the lifting control circuit when the preset limit height is reached, fundamentally preventing accidents such as steel wire rope overwinding, breakage and hook overtopping. It provides reliable protection for equipment and personnel safety. This product is compatible with all series of SANY cranes, crawler cranes, truck cranes and port hoisting equipment, featuring high protection level and strong anti-interference capability to adapt to various complex working conditions.
ICP6900 Monitor Display for XCMG Excavators
The ICP6900 is a This monitor is the original equipment manufacturer (OEM) standard for XCMG’s XCG series excavators and rotary drilling rigs. It fully complies with the factory electronic control system protocol, enabling direct installation without additional adaptation.
SANY 7.4″ Industrial Touch Display
Authentic SANY Compatibility: Direct fit for SANY STC200/STC250 cranes, SY series excavators, and other models. No additional modification or debugging required, seamlessly integrating with the original control system. Industrial-Grade Durability: Constructed with high-strength aluminum alloy housing and heat-dissipating fins, this display resists vibration, dust, and extreme temperatures (-20°C to +70°C operating range), ideal for on-site construction conditions.
XCMG Crane Dedicated | Hirschmann IC5600 Load Moment Limiter Display | Advanced Safety Monitoring Terminal
Equipped with a high-definition industrial-grade LCD screen, the IC5600 provides clear real-time display of key operating data such as lifting load, boom radius, angle, and rated load, even under strong light. Powered by an advanced load moment limiting (LMI) algorithm, it features a scientific three-stage safety warning mechanism: when the load reaches 90% of the rated value, it triggers a gentle pre-warning; at 100%, the alarm intensifies; and at 104%, it automatically shuts down lifting and radius-increasing operations to avoid accidents. It also adds practical functions like multi-level password protection (preventing misoperation by irrelevant personnel), power-off memory
Sany Custom High-Intensity Headlight
This factory-upgraded headlight is designed exclusively for Sany heavy-duty truck models. It features an integrated lens structure that significantly improves nighttime driving safety, serving as a direct replacement and upgrade for your original factory headlight.
WIKA iFLEX E5/0101 Crane Dedicated Controller
The WIKA iFLEX E5/0101 is a core control unit specifically engineered for construction machinery, particularly for various types of cranes. It can collect and process signals from load moment limiters, angle sensors, length sensors, and more in real time, then output precise control commands, making it a critical component for ensuring the safe and efficient operation of lifting equipment.
Kunlun Tongtai mcgsTpc Industrial HMI Touch Screen
Industrial-Grade DurabilityEngineered for harsh factory floors with a wide operating temperature range (-10°C to 60°C) and 24V DC wide-voltage input. Built-in EMC protection ensures stable operation even in high-interference environments. Crystal-Clear VisualizationHigh-brightness LCD displays (up to 1000 nits) with responsive capacitive touch, ensuring readability in direct sunlight and quick operator input.
XCMG Crane Dedicated Boom Junction Box CAN Board
Key Product Features Plug-and-Play Factory Fit The connectors and pinouts are 100% compatible wit...
WIKAI HC2903-035 Load Moment Indicator (LMI) Monitor
The HC2903-035 Load Moment Indicator (LMI) is a dedicated core safety monitoring component tailored for truck-mounted cranes, mobile cranes, and aerial work platforms. Engineered specifically to meet the rigorous demands of heavy-duty lifting operations, this model dynamically calculates and displays real-time load moment by precisely collecting three key operational data points: load weight, boom length, and luffing angle. Aligned with industry safety standards
XCMG Crane Tail Light Lens
This tail light lens can withstand long-term outdoor exposure, rain, and extreme cold. The red-amber-white color zoning preciselyenhancing safety during operation and travel.
HIRSCHMANN LG105 Length Sensor Product Description
The HIRSCHMANN LG105 Length Sensor is a high-precision measurement device engineered for industrial environments. It employs a non-contact measurement principle to capture real-time length and displacement data, converting it into a standard electrical signal for seamless integration with industrial control systems. Its robust metal housing and modular design ensure stable operation in harsh conditions such as high dust and strong vibration, making it a core measurement component in construction machinery, port cranes, mining equipment, and more.
XCMG Crane Parts | Hirschmann IC3600/IC4600 Upper Truck Computer Display | OE Safety Monitoring Screen
As core safety components for XCMG cranes, the Hirschmann IC3600 and IC4600 Upper Truck Computer Displays are engineered to OE standards for reliable performance. Both models are tailor-made for XCMG crane series, Both the IC3600 and IC4600 feature high-performance industrial LCD screens, delivering clear visibility even in extreme working environments such as strong sunlight, high temperatures, and heavy vibration.
Xuzhou Hirschmann IC3601 Crane Dedicated Display
Real-time Condition Monitoring: Dynamically displays moment percentage, actual load, rated load, boom length, and elevation angle, keeping operators fully informed of equipment status. Multi-level Safety Warning: The 3-color warning bar (green/yellow/red) on the right side of the screen changes synchronously when approaching safety limits, paired with a buzzer alert to proactively avoid hazards. Original Factory Protocol Compatibility: Perfectly matches the original control protocol of the Zoomlion QY30V, enabling direct replacement without additional debugging for stable data transmission.
XCMG Crane CAN Communication Length & Angle Conversion Board
Real-time acquisition and conversion of boom length and angle sensor signals for accurate, low-latency data transmission Stable communication with the crane’s main control computer via CAN bus (CANL/CANH interfaces) to support safety system logic operations Built-in power stabilization module to provide reliable power for sensors and peripheral components Plug-and-play compatibility with XCMG’s original HIRSCHMANN and other authorized computer systems, requiring no additional debugging
