Product Category
-
25K Lower Tail Light Lens
-
Bosch 0281020410 Engine ECU Control Module
-
Hirschmann HC3902 Crane Display Terminal
-
EPEC MND140 XCMG Crane Lower Cab Display
-
WIKAI HC2903-035 Load Moment Indicator (LMI) Monitor
-
cSCALE S9 Compact Safety Controller
-
Hirschmann LWG610 Length & Angle Sensor Reel Box
-
Hirschmann Industrial On-Board Controller
-
XCMG Crane Old Model 25K Universal Tri-Color Rear Tail Light Assembly
-
Zoomlion ZLDQ-8BA-6Q Construction Machinery LCD Display
-
SANY Construction Machinery Industrial Monitor SR series
-
LC2-10-C-2H Solenoid Valve Coil
-
XCMG Crane Dedicated | 6600 －０７０ＨLoad Moment Limiter Display | Industrial-Grade Safety Monitoring Terminal
-
HA-JD-01R Angle Detector
-
Industrial Hall Effect Joystick | 3-Axis Control Handle
-
Hirschmann LMI Load Moment Indicator
JC6000 Series Industrial Joystick Controller
The JC6000 Series Industrial Joystick Controller is engineered for construction machinery, marine vessels, and aerial work platforms. Built with Hall-effect sensing technology, it delivers high-precision, proportional control signals in harsh operating environments. It is an original equipment manufacturer (OEM) component for XCMG cranes and other heavy machinery, ensuring reliable performance in demanding conditions.
Description
Tags
The JC6000 Series Industrial Joystick Controller is engineered for construction machinery, marine vessels, and aerial work platforms. Built with Hall-effect sensing technology, it delivers high-precision, proportional control signals in harsh operating environments. It is an original equipment manufacturer (OEM) component for XCMG cranes and other heavy machinery, ensuring reliable performance in demanding conditions.
Model & Specification Comparison Table
| Model | Grip Type | Button Configuration | Control Axes | Communication Protocol | Protection Rating | Typical Applications |
| JC6000-A | Dual-button control grip | 2 x red trigger buttons | 1-axis / 2-axis (selectable) | CANbus / Analog Output | IP65 | XCMG crane upper control, marine deck equipment |
| JC6000-B | Basic grip (no buttons) | No additional buttons | 1-axis / 2-axis (selectable) | CANbus / Analog Output | IP65 | Aerial work platforms, excavator pilot control |
| JC6000-C | Multi-function control grip | 4 x customizable buttons + 1 x E-stop | 2-axis + rotary axis | CANopen / SAE J1939 | IP67 | Military special vehicles, large lifting machinery |
Key Features
Hall-Effect Sensing Technology
Non-contact detection eliminates mechanical wear, ensuring a lifespan of over 10 million cycles. Signal linearity error is less than 1%.
Extreme Environmental Resistance
Operates reliably from -40°C to +85°C, with vibration resistance up to 10g. Designed to withstand moisture, dust, and oil contamination.
Flexible Customization
Supports 1-axis, 2-axis, or 3-axis control configurations. Button count and functions can be tailored to match specific equipment requirements.
Safety Redundancy
Integrated fault diagnostics and signal redundancy trigger safety protection actions in abnormal conditions, preventing equipment runaway.
OEM-Quality Certification
CE and RoHS certified, and specified as a key component by leading enterprises like CSSC (China State Shipbuilding Corporation) and XCMG Group, meeting industrial-grade reliability standards.
Installation & Compatibility
Mounting: Flange-mounted, compatible with standard construction machinery interfaces
Electrical Connection: M12 waterproof connectors for quick plug-and-play installation
Compatible Equipment: XCMG full-series cranes, Sany aerial work platforms, CSSC marine vessels, etc.
CONTACT US
Related Products
XCMG Original Hirschmann IFLEX C3 Controller
This product is a core electronic control unit (ECU) from XCMG’s original equipment manufacturer (OEM), engineered and manufactured by Germany’s Hirschmann specifically for heavy-duty construction machinery. It features a cast-aluminum sealed enclosure with exceptional dustproof, waterproof, and vibration-resistant performance. As the exclusive “brain” for XCMG’s 26-ton and larger series rollers, it precisely controls critical functions such as travel, vibration, and steering, ensuring stable operation even in the most complex working conditions.
HA-JD-01R Angle Detector
The HA-JD-01R Angle Detector is an industrial-grade inclination sensor engineered for heavy machinery, lifting equipment, and automated production lines. It features high-stability sensing components that accurately detect angular changes over a wide range of 0°~260°, and outputs a linear analog voltage signal for seamless integration with industrial control systems. Its all-metal housing provides exceptional resistance to shock and electromagnetic interference, ensuring reliable performance even in harsh operating environments.
SANY GJ-1 Limit Switch (Fits All SANY Hoisting Equipment Series)
The SANY GJ-1 Overwind Switch is a safety protection device specifically designed for hoisting machinery. By real-time monitoring the hook position, it quickly cuts off the lifting control circuit when the preset limit height is reached, fundamentally preventing accidents such as steel wire rope overwinding, breakage and hook overtopping. It provides reliable protection for equipment and personnel safety. This product is compatible with all series of SANY cranes, crawler cranes, truck cranes and port hoisting equipment, featuring high protection level and strong anti-interference capability to adapt to various complex working conditions.
Xuzhou Hirschmann IC3601 Crane Dedicated Display
Real-time Condition Monitoring: Dynamically displays moment percentage, actual load, rated load, boom length, and elevation angle, keeping operators fully informed of equipment status. Multi-level Safety Warning: The 3-color warning bar (green/yellow/red) on the right side of the screen changes synchronously when approaching safety limits, paired with a buzzer alert to proactively avoid hazards. Original Factory Protocol Compatibility: Perfectly matches the original control protocol of the Zoomlion QY30V, enabling direct replacement without additional debugging for stable data transmission.
XCMG Crane Tail Light Lens
This tail light lens can withstand long-term outdoor exposure, rain, and extreme cold. The red-amber-white color zoning preciselyenhancing safety during operation and travel.
SANY Original Boom Length Measuring Cable Reel DX-13 for Crane
This is an original factory cable reel (also known as a boom length measuring sensor) exclusively designed for SANY cranes. As a core component of the crane safety monitoring system, it accurately collects real-time data on boom extension and retraction, providing precise safety assurance for lifting operations.
EPEC 2023/2024 Controller
The EPEC 2023/2024 is an embedded control unit designed exclusively for construction machinery, serving as the “electronic control brain” in harsh-environment equipment such as excavators, cranes, and mining machinery. It features a rugged cast-aluminum heat-dissipating housing, supports CAN bus communication and CODESYS programming, and reliably drives hydraulic systems, engines, and various sensors.
Zoomlion Crane Load Moment Limiter Display Terminal
This display terminal is a standard safety monitoring unit for Zoomlion’s full range of cranes. Adopting industrial-grade hardware design, it is tailor-made for the complex working conditions of construction machinery. It dynamically collects key data such as lifting weight, boom length, radius, and angle, calculates the lifting moment in real-time, and provides intuitive safety early warnings to operators through a high-definition display screen and sound-light alarm. It serves as the core guarantee to prevent crane overloading and tipping.
WIKA WGC 090-1401/WG211-090
The WGC 090-1401 is a high-precision angle sensor engineered by Germany’s WIKA specifically for the construction machinery sector. As a core component of the load moment limiter system in heavy-duty mobile cranes and crawler cranes, it provides real-time, accurate monitoring of the boom’s elevation angle. This critical data ensures the safety of lifting operations, and the sensor is widely compatible with leading Chinese construction machinery brands such as XCMG, SANY, and Zoomlion.
XCMG Sensor LPS60-049P6009
The LPS60-049P6009 is an industrial-grade dual-channel pressure sensor engineered for hydraulic systems. It adopts high-precision diffused silicon sensing elements, delivering dual independent standard electrical signals to accurately monitor pressure fluctuations in construction machinery hydraulic circuits, providing real-time and stable pressure data for the control system. Specifically designed for XCMG aerial work platforms and other heavy-duty equipment, it features excellent vibration resistance, impact resistance, and corrosion resistance, enabling long-term reliable operation even under harsh working conditions.
WIDE Horizontal Screen Moment Limiter (ZOOMLION Exclusive)
Don’t risk costly accidents or downtime on your job site. The WIDE Horizontal Screen Moment Limiter is engineered exclusively for ZOOMLION mobile and crawler cranes, delivering real-time protection against overload, tipping, and catastrophic failure. Trusted by professional operators worldwide, this rugged industrial monitor ensures your lifts stay safe, compliant, and efficient—every time.
Current Monitoring and Protection Board for Crane Model 208 Cable Reel Box
Product Overview This product is a dedicated core safety monitoring component custom-developed fo...
SANY 7.4″ Industrial Touch Display
Authentic SANY Compatibility: Direct fit for SANY STC200/STC250 cranes, SY series excavators, and other models. No additional modification or debugging required, seamlessly integrating with the original control system. Industrial-Grade Durability: Constructed with high-strength aluminum alloy housing and heat-dissipating fins, this display resists vibration, dust, and extreme temperatures (-20°C to +70°C operating range), ideal for on-site construction conditions.
Electronic Accelerator Pedal for Electric Vehicles
This Hall-effect electronic accelerator pedal is specially designed for electric forklifts, sightseeing cars, patrol vehicles, and sanitation cleaning vehicles. It features non-contact signal output, eliminating mechanical wear and offering a service life of over 1,000,000 cycles. It delivers precise speed control, providing a stable and reliable power input solution for all types of industrial electric vehicles.
4V220-08 Double Solenoid 5/2 Way Solenoid Valve
The 4V220-08 is a double solenoid 5/2 way solenoid valve under AirTAC brand, featuring a pilot-operated structure. It switches the spool position via electromagnetic signals to achieve commutation control of air flow, and is widely used in the drive and circuit control of various pneumatic actuators.
ZOOMLION Genuine DX-25B Cable Reel
For those in the construction industry, you know that accurate length signals from your crane’s telescoping boom are critical for safe lifting operations. The DX-25B Cable Reel is a genuine OEM component designed specifically for ZOOMLION 25-ton mobile cranes, delivering reliable performance you can count on.
