Product Category
-
XCMG Construction Machinery Dedicated Keypad Control Motherboard Panel2 V1.0
-
Danfoss 11274622 Control Handle for Aerial Work Platforms
-
XCMG Crane Parts | Hirschmann IC3600/IC4600 Upper Truck Computer Display | OE Safety Monitoring Screen
-
Hirschmann LWMG322 Length & Angle Sensor + Cable Reel Kit for Cranes
-
Electronic Accelerator Pedal for Electric Vehicles
-
Sany Custom High-Intensity Headlight
-
533450-A25H3X0-3 Angle sensor
-
PAT DSIK380 Load Moment Indicator (LMI) Monitor
-
SANY Genuine Pressure Sensor (MBS Series)
-
Penny & Giles JC6000 Industrial Joystick Handle
-
XCMG Crane Dedicated Boom Junction Box CAN Board
-
E-MEMS-LI-X Inclinometer/Angle Sensor
-
XCT25KC Rear Tail Light Assembly
-
WIKA WGC 090-1401/WG211-090
-
Crane Safety Upgrade Solution: Intelligent Moment Limiter Retrofit Kit
-
XCMG XESA2B-CL15M
Hirschmann LMI Load Moment Indicator
Engineered for the safety of construction machinery lifting operations, the Hirschmann LMI Load Moment Indicator serves as the core safety component for mobile cranes, all-terrain cranes, and similar equipment.
Description
Tags
| Feature Module | Detailed Description |
| Real-Time Safety Monitoring | Synchronously collects data from boom angle sensors, length sensors, telescopic ratio sensors, and load cells to dynamically calculate the current load moment. |
| Multi-Level Alarm Protection | Activates a primary alert when the load reaches 90% of the rated capacity, and a secondary alert with forced circuit cutoff for dangerous actions when the load exceeds 105%. |
| Black Box Data Logging | Built-in storage records up to 1,000 hours of operational data, including alert and alarm events. Data can be exported via USB for incident analysis and compliance audits. |
| Multi-Working Condition Adaptation | Supports main/auxiliary hook operations, luffing, telescoping, and other working modes. Custom safety load curves can be preset for different boom lengths and angles. |
| Explosion-Proof & Rugged Design | Die-cast aluminum housing with IP66 protection rating, designed to withstand harsh outdoor conditions including high temperatures, humidity, and dust. |
| Parameter Category | Details |
| System Version | WIKA SYS-C2a V3.30 |
| Input Signals | Angle sensor (0-5V/4-20mA), length sensor (pulse/analog), load sensor (mV/V) |
| Output Interfaces | 2 relay outputs (warning/alarm), RS485 communication port (supports CANbus protocol) |
| Power Supply | DC 24V (±10%) |
| Operating Temperature | -40°C ~ +85°C |
| Protection Rating | IP66 (housing) / IP67 (connectors) |
| Mounting Type | Flush-mount / Wall-mount |
| Housing Material | Die-cast aluminum (powder-coated finish) |
CONTACT US
Related Products
Industrial Proportional Control Joystick
Designed specifically for construction machinery, lifting equipment, aerial work platforms, and other demanding scenarios, this joystick combines ergonomic design with precision sensing technology to deliver accurate proportional control of hydraulic valves or actuators. It features high protection ratings and durability, making it ideal for harsh outdoor working environments.
SANY Construction Machinery Industrial Monitor SR series
A highly reliable industrial display terminal designed exclusively for SANY heavy machinery such as rotary drilling rigs and truck cranes. It features wide temperature adaptation, vibration resistance, waterproof and dustproof performance, ensuring stable operation even in extreme working conditions.
Diesel Engine Intelligent Monitor
Our Industrial Bus Monitor is the ultimate upgrade for your diesel engine. It delivers real-time, precise data straight from your engine’s ECU, so you can spot issues before they turn into expensive repairs. Designed for construction machinery, generator sets, marine vessels, and heavy-duty trucks, this monitor replaces old-fashioned dials with a crisp digital display, giving you full visibility into your engine’s health—anytime, anywhere.
ZF Intarder Control Unit (0 260 001 028 / ZF 6009 373 001)
This is an original equipment manufacturer (OEM) control unit for ZF Intarder systems, manufactured by BOSCH. As the core electronic component of the retarder system, it delivers precise signal control to provide continuous, stable auxiliary braking for heavy-duty vehicles such as trucks, cranes, and buses. It significantly reduces brake pad wear and enhances safety during long downhill descents and frequent braking scenarios.
Electronic Accelerator Pedal for Construction Vehicles
This electronic accelerator pedal is specifically designed for construction vehicles, heavy-duty trucks, and off-road equipment. It utilizes non-contact Hall sensor technology to deliver precise dual-channel voltage signals, ensuring stable and reliable control of vehicle power output. The pedal surface features an anti-slip texture, paired with a high-strength metal mounting bracket, making it suitable for frequent use in complex working conditions.
Zoomlion Integrated Headlight Product Description
This headlight is specifically engineered for Zoomlion vehicle series, featuring an all-in-one integrated design. It serves as a direct, factory-grade replacement upgrade that fits perfectly into the original mounting position, eliminating the need for any additional modifications. It effectively resolves issues like aging and insufficient brightness of original lamps, significantly improving nighttime driving safety.
Hirschmann HC4900 Load Moment Indicator (LMI)
The Hirschmann HC4900 Load Moment Indicator is a core safety protection device designed for all types of construction cranes. It collects critical operational data such as load weight, boom length, and angle in real time, dynamically calculates the lifting moment, and compares it with preset safety thresholds. If an overload or over-limit risk is detected, it immediately triggers an audible and visual alarm and outputs control signals, effectively preventing serious accidents and protecting personnel and equipment safety.
XCMG XESA2B-CL15M
This device is a safety protection component designed for various lifting equipment. It uses a weight sensor to detect the hook position. When the hook rises to the preset height, it automatically cuts off the hoisting power circuit to prevent collision between the hook and the top of the boom (anti-two block/anti-overwinding), effectively protecting equipment and personnel safety. Built with industrial-grade protection, it withstands harsh outdoor working conditions of construction machinery and is a mandatory core component required by lifting machinery safety regulations.
Penny & Giles JC6000 Industrial Joystick Handle
The JC6000 series joystick, engineered by UK-based Penny & Giles (now part of Curtiss-Wright), is purpose-built for the harsh operating conditions of construction machinery. It utilizes non-contact Hall effect sensing technology to deliver stable performance even under intense vibration and heavy dust. As an original equipment manufacturer (OEM) component for XCMG milling machines and pavers, this handle offers precise control and an exceptionally long service life, ensuring reliable operation in the field.
XCMG Construction Machinery Core Controller (ICM 7940)
This product is an original core controller exclusively supplied for XCMG Group, manufactured by Germany’s HIRSCHMANN. As the “electronic control brain” of construction machinery, it coordinates the engine, hydraulic system, sensors, and other components to achieve power management, motion control, condition monitoring, and fault diagnosis. Designed for XCMG’s main models such as excavators, cranes, and concrete pump trucks, it features high vibration resistance, wide temperature range, and strong electromagnetic compatibility to adapt to harsh working conditions.
GJ-3 Overwind Limit Switch
The GJ-3 Overwind Limit Switch is a safety protection device specifically designed for lifting equipment. Its core function is to prevent accidents such as wire rope overwinding, breakage, or lifting tool damage caused by the hook exceeding its upper limit position. Featuring a metal housing and mechanical trigger structure, it offers sensitive response, easy reset, and reliable performance, making it an essential safety component for industrial lifting operations.
PAT DSIK380 Load Moment Indicator (LMI) Monitor
The PAT DSIK380 is a rugged, industry-leading safety monitoring core designed for lifting equipment. It continuously collects and analyzes critical operational data including load weight, working radius, boom height, and slewing angle. When approaching or exceeding safety thresholds, it triggers immediate audible-visual alerts and automatically cuts off hazardous movements, effectively preventing accidents like overload-induced tipping or structural damage.
Product Description: EPEC 2038-20 Controller
The EPEC 2038-20 Controller is a compact, rugged control unit engineered for construction machinery, special-purpose vehicles, and mobile equipment.
Hirschmann Industrial Controller for Construction Machinery
This Hirschmann industrial controller is a high-reliability core control unit designed for heavy-duty construction machinery. It is widely used as a moment limiter and communication hub in XCMG, Sany, and other leading brands’ cranes, rollers, and excavators. Built with a rugged plastic housing and industrial-grade components, it delivers stable performance in extreme conditions such as high vibration, dust, and temperature fluctuations.
Steering Angle Sensor 530 760-A00AX20-1
High-Precision Angle Measurement Solution for Construction Machinery, Special Vehicles, and Industrial Steering Systems
Hirschmann PAT Series LWG208 Crane Cable Reel Sensor
This cable reel sensor is a core safety component in construction machinery, designed specifically for mobile cranes and all-terrain cranes. It integrates high-precision sensors and an automatic cable retraction mechanism to simultaneously detect boom extension length and elevation angle, transmitting real-time data to the Load Moment Indicator (LMI). This eliminates overload risks at the source, making it a critical device for ensuring lifting safety.
