Product Category
-
XCT Series Crane Tail Light Lens
-
LC2-10-C-2H Solenoid Valve Coil
-
25K Lower Tail Light Lens
-
Bosch 0281020410 Engine ECU Control Module
-
XCMG Crane HC4900 Load Moment Limiter Main Board
-
533450-A25H3X0-3 Angle sensor
-
Zoomlion Original Power Control Board – Specialized Power Distribution Module for Construction Machinery
-
XCMG Original Hirschmann IFLEX C3 Controller
-
XCMG Crane CAN Communication Length & Angle Conversion Board
-
EP/60B Industrial Joystick Product Description
-
Wika X602M Load Moment Indicator (LMI)
-
Danfoss 11274622 Control Handle for Aerial Work Platforms
-
Industrial Proportional Control Joystick
-
XCMG Construction Machinery Core Controller (ICM 7940)
-
EPEC 6107 Industrial Display Unit
-
Hirschmann HC3901 Load Moment Indicator
Hirschmann DAVC 300/2512 Hydraulic Transducer
Description
Tags
Key Features
Rugged Construction: All-stainless steel housing and hermetically sealed design for long life in harsh conditions.
High Reliability: Proven performance in mobile and stationary hydraulic systems, with resistance to pressure spikes and cavitation.
Application Scenarios
This sensor is a hydraulic pressure transmitter, mainly used for pressure monitoring and control of industrial equipment. Its typical application scenarios are as follows:
Construction machinery and lifting equipment
Core scenario: It is used in the hydraulic systems of various cranes (such as truck cranes, crawler cranes) as a core component of the Hirschmann load moment limiter system, which can monitor the pressure of hydraulic circuits in real time to ensure the safety of lifting operations.
Compatible equipment: Construction machinery of brands such as XCMG, SANY, Zoomlion, as well as imported cranes such as Terex and Manitowoc.
| Industry | Typical Use Cases | Key Benefits |
| Construction & Cranes | Hydraulic system pressure monitoring for mobile cranes, crawler cranes, and truck-mounted cranes. Integrates directly with HIRSCHMANN load moment limiters to prevent overloads and ensure lift safety. | Withstands high vibration and shock; delivers real-time pressure data to keep critical lifting operations safe and compliant. |
| Automotive Testing | Brake system pressure testing, hydraulic component validation, and durability testing in vehicle development labs. | Fast response time and high accuracy enable precise performance characterization under dynamic loads. |
Technical Specifications
| Parameter | Value |
| Measurement Range | 0–300 bar (0–4351 psi) |
| Output Signal | 4–20 mA |
| Accuracy | ±0.5% FS (Full Scale) |
| Media Compatibility | Hydraulic oil, mineral oil, water, and non-corrosive gases |
| Electrical Connection | Hirschmann M12 4-pin connector |
| Process Connection | G1/4 external thread (standard) |
| Protection Class | IP67 |
CONTACT US
Related Products
HIRSCHMANN WG143 Angle Sensor
The HIRSCHMANN WG143 Angle Sensor is a high-precision angular detection device engineered specifically for construction vehicles and heavy machinery. Using non-contact magnetoelectric sensing technology, it delivers real-time, accurate measurements of angular displacement in components such as robotic arms, steering mechanisms, and suspension systems. Its fully sealed construction and high IP rating ensure reliable performance in harsh conditions including dust, moisture, and intense vibration, making it an essential component for safe and intelligent equipment operation.
XCT Series Crane Tail Light Lens
This tail light lens is a dedicated replacement part for XCMG XCT series cranes. It is injection-molded from heavy-duty polycarbonate (PC) material, offering a precise fit with the original tail light assembly. With uniform light transmission, high impact resistance, and excellent aging resistance, it directly replaces cracked or faded original lenses, eliminating the need to replace the entire tail light unit. It is a cost-effective solution for repairing your crane’s rear lighting.
CET.10000.2.6.1.X Redundant Angle Sensor
The CET.1000[0.2.6.1](0.2.6.1).X is a CANopen redundant angle sensor manufactured by TSM (Top Sensor Manufaktur), engineered for industrial scenarios demanding high reliability and safety. It features the CANopen communication protocol and supports redundant signal output, delivering stable angle data feedback in heavy machinery, agricultural equipment, port machinery, aerial work platforms, and other applications where angle monitoring is critical for safe operation.
E-MEMS-LI-X Inclinometer/Angle Sensor
The E-MEMS-LI-X inclinometer (also known as a tilt sensor) is a core angle-detection component engineered for the harsh operating conditions of construction machinery. Leveraging mature MEMS sensing technology and industrial-grade protection design, it has become the preferred accessory for boom angle monitoring in SANY cranes. It is also compatible with various construction equipment such as tower cranes, crawler cranes, and aerial work platforms, accurately capturing the tilt posture of components to provide real-time data support for equipment operational safety and precision.
SANY Genuine Pressure Sensor (MBS Series)
A genuine pressure sensor designed exclusively for SANY construction machinery hydraulic systems. It accurately monitors pressure in hydraulic pumps, boom and arm cylinders, providing real-time data to the control system to ensure precise equipment operation and overload protection.
YL06ECB-11 Electronic Accelerator Pedal Assembly
This electronic accelerator pedal is engineered for construction machinery, agricultural equipment, and special-purpose vehicles. It uses Hall-effect sensing technology to accurately convert pedal travel into an electrical signal, delivering stable and reliable control input to engines or motors. Its rugged construction and IP65 dust/water resistance make it ideal for harsh operating environments.
Hirschmann LMI Load Moment Indicator
Engineered for the safety of construction machinery lifting operations, the Hirschmann LMI Load Moment Indicator serves as the core safety component for mobile cranes, all-terrain cranes, and similar equipment.
Hirschmann LWG610 Length & Angle Sensor Reel Box
This reel box is a core component of construction machinery safety systems, integrating high-precision dual measurement of length and angle. It is specifically designed for load moment limiters (LML) of mobile cranes, aerial work platforms, and other equipment. By real-time collecting data on boom extension length and luffing angle, it works with the main controller to monitor safe load capacity, fundamentally preventing dangerous conditions such as overloading and overreaching.
Current Monitoring and Protection Board for Crane Model 208 Cable Reel Box
Product Overview This product is a dedicated core safety monitoring component custom-developed fo...
XCT 5T/8T Universal Tail Light
Compatible with XCMG XCT5-ton and XCT8-ton truck cranes, designed to match the original factory specifications for direct replacement installation.The lamp housing is made of high-transmittance PC material, featuring impact resistance and aging resistance, ensuring clear warning signals even in harsh environments such as rainy or foggy days.
EPEC 2023/2024 Controller
The EPEC 2023/2024 is an embedded control unit designed exclusively for construction machinery, serving as the “electronic control brain” in harsh-environment equipment such as excavators, cranes, and mining machinery. It features a rugged cast-aluminum heat-dissipating housing, supports CAN bus communication and CODESYS programming, and reliably drives hydraulic systems, engines, and various sensors.
SANY Crane Height Limiter (ZN101W)
This product is the original factory-matched height limiter (anti-overwinding switch) for SANY truck cranes, specifically designed for safe crane operations. When the hook rises to the preset height, the device automatically cuts off the hoist’s lifting circuit and triggers an audible-visual alarm, preventing safety accidents such as hook overtravel and wire rope breakage. It is an indispensable safety protection device for lifting operations.
3B6 Crane Moment Indicator (Load Moment Limiter)
The 3B6 Crane Moment Indicator (also known as Load Moment Limiter) is an essential safety monitoring system designed for mobile cranes, crawler cranes, and truck-mounted cranes. It delivers real-time monitoring of lifting parameters—including load weight, boom angle, working radius, and calculated lifting moment—to keep operators informed and prevent overloads, tip-overs, and structural failures. When operating limits are approached or exceeded, the system triggers immediate audio-visual alarms and indicator warnings, making it a mandatory safety component for compliance with global crane operation standards.
ZF 6041.327.033 Transmission Control Unit
Superior Durability The cast aluminum housing provides excellent resistance to shock, vibration, and electromagnetic interference, making it ideal for the harsh operating conditions of construction machinery. Plug-and-Play Compatibility Designed specifically for ZF transmission systems, it can directly replace your faulty unit without additional programming.
GJ-3 Overwind Limit Switch
The GJ-3 Overwind Limit Switch is a safety protection device specifically designed for lifting equipment. Its core function is to prevent accidents such as wire rope overwinding, breakage, or lifting tool damage caused by the hook exceeding its upper limit position. Featuring a metal housing and mechanical trigger structure, it offers sensitive response, easy reset, and reliable performance, making it an essential safety component for industrial lifting operations.
Electronic Accelerator Pedal for Construction Machinery
This electronic accelerator pedal is specifically designed for construction machinery, heavy commercial vehicles, and agricultural equipment. It uses Hall-effect non-contact sensing technology to accurately convert pedal angle into electrical signals, delivering stable and reliable output that is compatible with the electronic control systems of various engineering vehicles. The pedal body is constructed from high-strength engineering plastics and a metal hinge mechanism, offering excellent resistance to impact, vibration, and extreme temperatures, making it suitable for long-term use in harsh working conditions such as construction sites and mining areas.
