Product Category
-
JC6000 Series Industrial Joystick Controller
-
XCMG Construction Machinery Dedicated Keypad Control Motherboard Panel2 V1.0
-
WIKA DLG200-4EH Industrial-Grade Data Logger
-
SANY Original Boom Length Measuring Cable Reel DX-13 for Crane
-
XCMG Crane Dedicated ICP6600-104 Load Moment Limiter Display | High-End Intelligent Safety Terminal
-
5320B Series Pressure Transducer
-
LC2-10-C-2H Solenoid Valve Coil
-
XCMG Sensor LPS60-049P6009
-
Electronic Accelerator Pedal for Construction Machinery
-
DENSO D88A-010-800 Engine Control Unit (ECU)
-
XCMG Crane Dedicated | Hirschmann IC5600 Load Moment Limiter Display | Advanced Safety Monitoring Terminal
-
Hirschmann PAT IK350/1358 Crane Safety Monitor
-
SANY GJ-1 Limit Switch (Fits All SANY Hoisting Equipment Series)
-
Electronic Accelerator Pedal for Electric Vehicles
-
Danfoss 11274622 Control Handle for Aerial Work Platforms
-
Zoomlion ZLDQ-8BA-6Q Construction Machinery LCD Display
E-MEMS-LI-X Inclinometer/Angle Sensor
The E-MEMS-LI-X inclinometer (also known as a tilt sensor) is a core angle-detection component engineered for the harsh operating conditions of construction machinery. Leveraging mature MEMS sensing technology and industrial-grade protection design, it has become the preferred accessory for boom angle monitoring in SANY cranes. It is also compatible with various construction equipment such as tower cranes, crawler cranes, and aerial work platforms, accurately capturing the tilt posture of components to provide real-time data support for equipment operational safety and precision.
Description
Tags
The E-MEMS-LI-X inclinometer (also known as a tilt sensor) is a core angle-detection component engineered for the harsh operating conditions of construction machinery. Leveraging mature MEMS sensing technology and industrial-grade protection design, it has become the preferred accessory for boom angle monitoring in SANY cranes. It is also compatible with various construction equipment such as tower cranes, crawler cranes, and aerial work platforms, accurately capturing the tilt posture of components to provide real-time data support for equipment operational safety and precision.
In terms of installation, the sensor supports two fixing methods: expansion bolt fixing and base plate adhesive fixing, which can be flexibly selected according to the structural characteristics of the boom steel structure. The mounting surface fits tightly, and it can be put into use without complex debugging. Wiring adopts an M12 waterproof connector, supporting RS485/Modbus mainstream communication protocols, which can seamlessly connect to the original control system of SANY cranes. The data transmission distance can reach 1 kilometer, meeting the wiring needs of large-scale equipment. Meanwhile, it supports reverse wiring design, reducing on-site installation error tolerance.
Core Technical Parameters
| Parameter Name | Specification | Remarks |
| Measurement Axis | Single Axis (Pitch Angle Measurement) | Suitable for boom pitch angle detection of cranes |
| Measurement Range | 0~±90° | Covers the full angle range of crane boom operations |
| Product Dimensions | 87mm×59mm×28mm (without mounting plate) | Compact structure, fits narrow installation space on boom |
Application Scenarios & Core Advantages
Customized for SANY cranes and other construction machinery, it is mainly suitable for boom angle monitoring of truck cranes, crawler cranes, and tower cranes. It can also be used in scenarios such as aerial work platform leveling, excavator arm posture detection, and port machinery tilt monitoring. Compared with ordinary inclinometers, its core advantages lie in: industrial-grade environmental adaptability, enabling long-term stable operation under harsh conditions such as vibration, extreme temperatures, and humidity; high-precision data output, providing accurate support for lifting operation safety; compatibility with mainstream construction machinery control systems, easy installation and debugging without major modification to the original equipment wiring, reducing construction costs and cycles.
CONTACT US
Related Products
DENSO D88A-010-800 Engine Control Unit (ECU)
This is an original engine control unit manufactured by DENSO Japan, serving as the core control component for 24V diesel power systems. It is widely compatible with various construction machinery and heavy-duty trucks. By precisely controlling fuel injection, ignition timing, and other critical parameters, it ensures efficient and stable engine operation, while its built-in self-diagnostic function helps reduce equipment maintenance costs.
SENTOP BN60FCA Electronic Accelerator Pedal
The SENTOP BN60FCA Electronic Accelerator Pedal is engineered for forklifts, loaders, excavators, and other construction machinery, as well as electric vehicles. It uses non-contact Hall sensor technology to convert pedal movement into precise electrical signals, allowing for accurate control of engine speed or motor power. Featuring dual redundant signal output and IP67 protection, this pedal delivers reliable performance in harsh working conditions and is a core control component for industrial vehicles.
P&G JC2000 Industrial Joystick Controller
The JC2000 series is a compact, non-contact industrial joystick designed for precision and durability in demanding environments. It utilizes Hall-effect sensing technology with no mechanical contacts, eliminating wear and poor connectivity issues. With an IP65 protection rating, it delivers reliable performance in dusty, humid, and harsh industrial settings. The integrated emergency stop button on the top, combined with its compact form factor, makes it ideal for direct panel mounting in control systems, robot teach pendants, medical devices, construction machinery, and CCTV pan-tilt platforms.
WIKA DLG200-4EH Industrial-Grade Data Logger
Engineered for harsh industrial environments, it stably records critical data to ensure operational safety and traceability of your equipment.
Hirschmann HC2900 Load Moment Limiter
The Hirschmann HC2900 Load Moment Limiter is a core safety protection device specially designed for tower cranes. It collects and analyzes critical operating parameters—such as load moment, lifting weight, and working range—in real time. When values approach or exceed safe thresholds, it immediately triggers audible and visual alarms, and outputs control signals to force the equipment to stop dangerous actions.
Zoomlion GJ-1 Overwind Protection Switch
The Zoomlion GJ-1 Overwind Protection Switch is an essential safety component for lifting equipment. When the hook reaches its upper limit position, the switch triggers instantly to cut off the hoist control circuit, preventing serious accidents such as steel wire rope breakage or hook fall caused by overwinding.
Crane-Specific 8-Channel Proportional Valve Driver Board
Designed exclusively for hydraulic control systems of various construction cranes, this board serves as the core driving component for precise control of multi-action mechanisms such as luffing, telescoping, slewing, and outrigger operation. It is compatible with mainstream brand proportional valves and can directly replace original equipment manufacturer (OEM) boards of the same specification.
ICP6600 Load Moment Limiter Display
Hirschmann ICP6600 Load Moment Limiter Display | XCMG High-End Crane Dedicated Safety Monitoring Terminal
Electronic Accelerator Pedal Assembly Product Description
This electronic accelerator pedal assembly features an all-electronic signal transmission design, eliminating the need for traditional mechanical cable systems. It accurately captures pedal travel angle and outputs a linear voltage signal, delivering smoother power response and more precise control for your vehicle.
Sany 20-Ton Crane Monitor (Load Moment Limiter)
The original factory-matched display terminal for Sany STC200, STC250, and other 20-tonne cranes, serving as the core safety device for lifting operations. It real-time collects and displays critical data such as load weight, boom length, and working radius, triggering an immediate alert when approaching safety thresholds and activating protection mechanisms to prevent lifting accidents.
ifm CR9042 Industrial Display Terminal
A rugged human-machine interface (HMI) designed specifically for construction machinery and heavy-duty vehicles, offering reliable performance and clear data visualization even in harsh job site conditions. It is a direct replacement for Zoomlion concrete pump trucks, mobile cranes, and other equipment.
A2Y07HPFU0 (0068-1) Temperature Sensor
The A2Y07HPFU0 (0068-1) is an industrial-grade temperature sensor constructed from brass, engineered for harsh operating conditions such as construction machinery, heavy-duty trucks, and generator sets. It delivers excellent vibration resistance, impact tolerance, and corrosion protection, ensuring long-term stable operation in extreme environments. This sensor accurately captures temperature signals and outputs reliable data, providing a solid foundation for the safe operation of your equipment.
Construction Machinery Vehicle Monitor Display
This vehicle monitor display is purpose-built for excavators, loaders, and other heavy construction equipment. It integrates real-time machine status monitoring with blind-spot camera feeds, featuring wide temperature tolerance, vibration resistance, dustproofing, and waterproofing to deliver reliable performance in harsh outdoor operating environments. It serves as the central information hub for your construction vehicle.
Hirschmann LWG610 Length & Angle Sensor Reel Box
This reel box is a core component of construction machinery safety systems, integrating high-precision dual measurement of length and angle. It is specifically designed for load moment limiters (LML) of mobile cranes, aerial work platforms, and other equipment. By real-time collecting data on boom extension length and luffing angle, it works with the main controller to monitor safe load capacity, fundamentally preventing dangerous conditions such as overloading and overreaching.
JC6000 Series Industrial Joystick Controller
The JC6000 Series Industrial Joystick Controller is engineered for construction machinery, marine vessels, and aerial work platforms. Built with Hall-effect sensing technology, it delivers high-precision, proportional control signals in harsh operating environments. It is an original equipment manufacturer (OEM) component for XCMG cranes and other heavy machinery, ensuring reliable performance in demanding conditions.
Hirschmann PAT Series LWG208 Crane Cable Reel Sensor
This cable reel sensor is a core safety component in construction machinery, designed specifically for mobile cranes and all-terrain cranes. It integrates high-precision sensors and an automatic cable retraction mechanism to simultaneously detect boom extension length and elevation angle, transmitting real-time data to the Load Moment Indicator (LMI). This eliminates overload risks at the source, making it a critical device for ensuring lifting safety.
