Product Category
-
XCMG Sensor LPS60-049P6009
-
LWG152 Cable Reel Sensor Assembly for Crane Length & Angle Measurement
-
SANY 7.4″ Industrial Touch Display
-
Mercedes-Benz CPC4-ECAN Control Module (A 005 446 18 02)
-
Old NANQI 25K-5 Headlight Assembly
-
YL06ECB-11 Electronic Accelerator Pedal Assembly
-
Kunlun Tongtai mcgsTpc Industrial HMI Touch Screen
-
WIKAI HC2903-035 Load Moment Indicator (LMI) Monitor
-
ZOOMLION Genuine DX-25B Cable Reel
-
X603F Load Moment Indicator (LMI) Display Terminal
-
Zoomlion GJ-1 Anti-Overwinding Switch
-
PEC-WY-03TA-200 Crane Load Moment Indicator Display
-
Hirschmann HC-3002 Crane Load Moment Indicator Monitor
-
EPEC 2023/2024 Controller
-
Sany 20-Ton Crane Monitor (Load Moment Limiter)
-
Zoomlion MCS-300 Load Moment Limiter (Original Equipment)
533 40-A35B0W0-0 Angular Encoder
Engineered by NOBEL ELEKTRONIK GmbH, the 533 40-A35B0W0-0 angular encoder delivers high-precision angular position feedback for demanding industrial environments. Its rugged construction and reliable performance make it ideal for applications where accurate rotational sensing is critical, even under harsh conditions.
Description
Tags
Engineered by NOBEL ELEKTRONIK GmbH, the 533 40-A35B0W0-0 angular encoder delivers high-precision angular position feedback for demanding industrial environments. Its rugged construction and reliable performance make it ideal for applications where accurate rotational sensing is critical, even under harsh conditions.
Key Features
High Resolution: Delivers precise angular position data for closed-loop control systems.
Rugged Design: IP-rated protection against dust, moisture, and mechanical shock, suitable for heavy industrial use.
Technical Specifications
| Parameter | Details |
| Model | 533 40-A35B0W0-0 |
| Manufacturer | NOBEL ELEKTRONIK GmbH |
| Resolution | Up to 19-bit (0.0019° angular resolution) |
| Signal Output | SSI (Synchronous Serial Interface) + Incremental A/B/Z signals |
| Supply Voltage | 10–30 V DC |
| Shaft Diameter | 40 mm (standard) |
Ideal Applications
This encoder excels in industries requiring precision and durability:
Wind Turbines: Pitch control and yaw angle monitoring for renewable energy systems.
Installation Notes
Electrical Wiring: Follow the color-coded wire assignment (labeled on the encoder housing) for correct signal connection.
Grounding: Properly ground the encoder to prevent electrical noise and ensure signal integrity.
CONTACT US
Related Products
XCMG Crane-Specific Hirschmann IC2600 Load Moment Indicator Display | Original Equipment Safety Monitoring Computer
XCMG Crane-Specific Hirschmann IC2600 Load Moment Indicator Display | Original Equipment Safety Monitoring Computer
SANY 7.4″ Industrial Touch Display
Authentic SANY Compatibility: Direct fit for SANY STC200/STC250 cranes, SY series excavators, and other models. No additional modification or debugging required, seamlessly integrating with the original control system. Industrial-Grade Durability: Constructed with high-strength aluminum alloy housing and heat-dissipating fins, this display resists vibration, dust, and extreme temperatures (-20°C to +70°C operating range), ideal for on-site construction conditions.
3B6 Crane Moment Indicator (Load Moment Limiter)
The 3B6 Crane Moment Indicator (also known as Load Moment Limiter) is an essential safety monitoring system designed for mobile cranes, crawler cranes, and truck-mounted cranes. It delivers real-time monitoring of lifting parameters—including load weight, boom angle, working radius, and calculated lifting moment—to keep operators informed and prevent overloads, tip-overs, and structural failures. When operating limits are approached or exceeded, the system triggers immediate audio-visual alarms and indicator warnings, making it a mandatory safety component for compliance with global crane operation standards.
XCT 5T/8T Universal Tail Light
Compatible with XCMG XCT5-ton and XCT8-ton truck cranes, designed to match the original factory specifications for direct replacement installation.The lamp housing is made of high-transmittance PC material, featuring impact resistance and aging resistance, ensuring clear warning signals even in harsh environments such as rainy or foggy days.
TM 63201 24V Solenoid Valve Product Description
The TM 63201 is a pilot-operated proportional solenoid valve engineered for heavy-duty hydraulic systems. It delivers fast response and stable pressure control, making it ideal for demanding applications such as construction machinery and commercial vehicle hydraulic systems. This valve precisely regulates oil pressure and flow to ensure efficient equipment operation.
Hirschmann Industrial On-Board Controller
All-metal heat-dissipating housing with anti-vibration and dust-proof performance, operating reliably in a wide temperature range of -40°C ~ +85°C. Multi-Interface Redundant Communication：Integrated Ethernet, CAN bus, and 3 optical ports for high-speed data exchange between crane systems. Real-Time Safety Monitoring：Built-in moment calculation algorithm that continuously monitors load, boom length, and angle, triggering automatic protection in case of overload. Original Equipment Compatibility：Perfectly matches XCMG crane models , enabling plug-and-play functionality without additional configuration.
EPEC MND140 XCMG Crane Lower Cab Display
This display is an original OEM component for XCMG XCT series and other mobile cranes, built on the Finnish EPEC MND140 color display module. Engineered for harsh construction environments, it integrates display and control functions to deliver real-time vehicle status, load moment data, and alarm notifications, making it a critical safety component for crane operations.
Zoomlion GJ-1 Anti-Overwinding Switch
The GJ-1 Anti-Overwinding Switch is a safety protection device designed specifically for engineering lifting equipment, primarily used in the hoisting mechanisms of mobile cranes, crawler cranes, and similar machinery. It triggers automatically when the hook reaches the preset upper limit position, cutting off the power supply to prevent equipment damage and safety accidents caused by wire rope overwinding. It is a core component for ensuring safe lifting operations.
WIKA MH-4 Pressure Transducer
The WIKA MH-4 pressure transducer is engineered for the harsh operating conditions of construction machinery and mobile hydraulic equipment. Featuring an all-metal welded construction and integrated shock-resistant design, it delivers precise pressure signals reliably even under vibration, shock, and temperature fluctuations. It is the ideal pressure monitoring solution for hydraulic systems, braking systems, and heavy-duty equipment.
Hirschmann A2B-Z DC-12 Height Limit Switch (Anti-Overwinding Switch)
This product is a safety protection device specifically designed for construction machinery. Its core function is to prevent crane hooks from overwinding during ascent, avoiding steel wire rope breakage or equipment damage. Built with a high-strength industrial-grade housing and a precise mechanical trigger structure, it operates reliably in various complex working conditions, making it an essential safety component for cranes, tower cranes, and other lifting equipment.
Hirschmann HC-3002 Crane Load Moment Indicator Monitor
This product is an industrial-grade safety monitoring terminal designed exclusively for the construction machinery sector. Built with original German Hirschmann technology, it is fully compatible with mainstream crane brands such as XCMG, Zoomlion, and Sany. By real-time collecting and displaying critical operational data including load weight, boom length, working radius, and angle, combined with built-in safety algorithms, it effectively prevents dangerous conditions like overloading and overreaching, making it a core safety device for lifting operations.
Sany Custom High-Intensity Headlight
This factory-upgraded headlight is designed exclusively for Sany heavy-duty truck models. It features an integrated lens structure that significantly improves nighttime driving safety, serving as a direct replacement and upgrade for your original factory headlight.
SANY Crane Height Limiter (Anti-Overwinding Switch)
Designed specifically for SANY and various types of lifting equipment, this is a core safety device to prevent hook overtravel and ensure construction safety.
Zoomlion Mobile Crane Load Moment Indicator (LMI) Display Terminal
This is an original equipment manufacturer (OEM) Load Moment Indicator (LMI) display terminal designed exclusively for Zoomlion’s mid-to-small tonnage mobile cranes. As a core safety component, it real-time collects and displays critical operational data including load weight, boom length, working radius, and boom angle. When the system detects the crane approaching its safety limits, it triggers an immediate audible and visual alarm to prevent overload and tipping accidents.
E-MEMS-LI-X Inclinometer/Angle Sensor
The E-MEMS-LI-X inclinometer (also known as a tilt sensor) is a core angle-detection component engineered for the harsh operating conditions of construction machinery. Leveraging mature MEMS sensing technology and industrial-grade protection design, it has become the preferred accessory for boom angle monitoring in SANY cranes. It is also compatible with various construction equipment such as tower cranes, crawler cranes, and aerial work platforms, accurately capturing the tilt posture of components to provide real-time data support for equipment operational safety and precision.
Sany Original 10.4-inch Special Display for Construction Machinery
This industrial-grade human-machine interface terminal is custom-engineered for Sany excavators, cranes and other heavy construction equipment. Fully compatible with the original factory CAN bus protocol, it enables direct replacement of the stock screen with zero extra debugging, ensuring seamless integration with your Sany machinery.
